08330000095 KN90-Q40KN-ANU-V2
Product Description |
inclination sensor |
|
|
Name | KN90-Q40KN-ANU-V2 |
Order number | 08330000095 |
Mounting | non shielded |
Switch type | analog |
Signal Type | Analog Voltage |
Connection | connector M12 |
Dimension (in mm) | Q 53,3 x 22.5 x 75 |
Technical Specification |
|
Special features | analog Output voltage 1 channel |
Operating voltage | 10 - 30 V DC |
Max. load current | 20 mA |
No load current | ≤ 14 mA |
Treshold frequency | 2 Hz |
Operating temperature | -40 ° C to 85 ° C |
Temperature drift | +/- 0,115 °/K |
Swiching state | LED |
Analog output | Pulso_has1 1 ... 9 Volt |
Real sensitivity | typ. 44,44 mV/° |
Time delay | 200 ms |
Resolution | typ. <= 0,062 ° |
Accuracy | +/- 0,28% Fullscale |
Inclination angle | +/- 90° |
Measuring axis | Z |
Short-circuit proof | yes |
Overload protection | yes |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-2:2014 |
Housing material | PA 6.6 |
Utilisation category | DC 13 |
Termination | Connector M12 4pin |
output voltage at -90° | 1,0 V |
output voltage at 0° | 5,0 V |
output voltage at +90° | 9,0 V |
max. load resistor | >= 450 Ohm |
FIT / MTTF acc. to SIEMENS 29500 | 315,4 / 362y |
Errors and omissions exceptet |